Multi client network configuration for Object30 3-D Desktop Printer?
This article gives you some information regarding Multi-Client Network Configuration in Object30 3-D Desktop Printer.
Work Configurations of Object30 3-D Desktop Printer
The Object30 3-D printing system can be set up as a single-station system and also used as a multi-station system if more than one systems are connected with single printr. When connected to a local computer network, the system can be server multiple users.
In such configurations, each user workstation (client) prepares files with Object Studio software for printing. In multi-connection with system a server (host),is connected with KVM switch and Object30 printer , acts as a job manager that sends printing job to the printer for printing.
Below figure shows the Object30 printer set up in a multi-client configuration.
When installing the Object software, you can choose whether to install it as a client or as a master station (server or standalone station).Function of KVM Switch in Object30 3-D Desktop Printer
KVM switch is used to connect the two computers one is in-built in Object30 3-D printer and server. You can access only single desktop at time by pressing two times scroll then enter.Function of Server in Networking System of Object30 3-D Desktop Printer
As given in above figure that final signal is given by the server to the printing system. server is connected with computer through KVM switch and directly with Object30 3-D printer.
From the server all things can be predicted like printing material is required for given print, and also calculate the available material in the loaded cartage. Time required for the printing along with staring time and finishing time can be observed from the server so any one can calculate the average time and material required for printing.
The Object software arranges the jobs it receives according to their properties, model-material type, and other factors. In multi-workstation configurations, the operator of the server-typically the production administrator-has total control over the jobs sent to the 3-D printer, and can prioritize and delete jobs, review bob history and reprint a job, and so on.
