Activation of the telnet client on Windows 7


The following steps will show you how the Telnet client on Windows 7 can be activated.

If you attempt a connection on Windows 7 on a Telnet server, you get the following error message "The command "telnet" is either misspelled or could not be found"message.

  • Click "Start" and then "Control Panel". Click the Control Panel window, click "Programs" and then "activate Windows features on or off.

  • Wait one moment from. Then scroll to the item "Telnet Client" and activate it. Then click "OK".

  • Wait a moment until the functions are configured and adopted. This process may take a moment

  • Then scroll to the item "Telnet Client"and enable this. Then click "OK".

  • Wait a moment until the functions and assumed to be configured. This process may take a while.

  • The telnet client is activated and you can easily build a connection to a Telnet server. Simply enter in the search box as the command: telnet 192.168.2.2.


  • Note: All information on this page have been compiled with care or created. Since errors are never entirely exclude, however, we point out that we have neither a guarantee nor take responsibility for consequences which are due to take information about incorrect.


    Comments

    Author: herpy mcDerpington09 Jun 2011 Member Level: Bronze   Points : 0

    Here's another guide on how to get this done:
    fettesps.com/windows-7-enable-telnet/