Windows Server 2008 Network Infrastructure, Configuring: Configuring Network Access

Configuring Network Access weighs 22% of the exam and includes topics like configuration of direct access, Network Access Protection (NAP), Network Policy Server (NPS), direct access. One must have knowledge of NAT, SSTP, etc. to clear the exam successfully.

Total 23 questions found in this category.

Submit Question   Show By Status: New Submissions   Pending   Deleted   Approved   

Question	Subject	Category
You have a Laptop which has only wireless adapter available on it but no Ethernet adapter. Your laptop runs on Windows 7 (Professional) and has IPSec enabled on the wireless adapter. You are able to connect to the company domain using this laptop when in office. But you are not able to use this laptop to connect to the company DirectAccess network from home. What may be the reason?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
Which one of the following technologies does DirectAccess provide a possible replacement of?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
How many network adapters is the minimum requirement for configuring a Windows Server 2008 R2 as a DirectAccess server?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
Over which protocol will you configure DirectAccess?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
Select the item from the list below which NRPT is a collection of.	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
How many IPSec policies can be active on a computer at one time?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
Which of the following command line tools can be used to find out the information about the installed Computer certificated for managing DirectAccess on a Windows Server 2008 R2 Enterprise?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
You want to enable DirectAccess on your network with Windows Server 2008 Enterprise as the server (which is also a DC) and Windows 7 Ultimate clients. It will not be possible because _______________ ?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
You do not want to use the NAP configuration wizard but achieve a finer control on the access to network resources using some other method. What would be the best method?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
Which of the following tools will help you allow the NAP client to support the Windows XP version of 802.1X Enforcement Client component?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
Which of the following will you configure to enforce DHCP on your network using NPS?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
You want to configure your network access over VPN to be protected using smart card certificates. What do you need to deploy before doing this?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
Which one of the following is the recommended authentication protocol for connecting to a VPN server setup by NPS console?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
In how may ways can RADIUS accounting be done?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
The current RADIUS server (using NPS) is authenticating the requests for the TS Gateway inbound connection requests. Now the server is forwarding the authentication requests to another server. What is this server acting as now?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
Which of the following will send a EAP-request packet to the machine trying to connect to a Wireless Access Point?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
Which of the protocols below, supported by RRAS in Windows is most secure?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
There is a Server running on Windows Server 2008 on the network with the NPS running on it. You want to use this server to allow a particular user to be able to access other computers on the network using the TS Gateway. What type of Policy will you configure?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
Keeping the topic of "Network Access" in mind, select the false statement from the following list.	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
You are asked top use the RADIUS server for authorizing Remote Access Connections with the domain's DC. You do not find any software in the all programs list which can do the RADIUS authentication on the server. What can be done?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
Which of the following conditions do not pose connectivity challenges which cannot be solved by VPN connections in most cases?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
You are trying to grant Dial-up service on a Windows Server 2008 based server on your company network. You want that the IP address allocated to the connecting clients should be dynamic. The server does not run DHCP server and it is recommended that DHCP should not be enabled either. What will you do?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access
Your company wants to allow members of a particular project to be able to work from home on the projects. Which type of connection should be configured for them to be able to do the work from home?	Windows Server 2008 Network Infrastructure, Configuring	Configuring Network Access

Submit Interview/Test Questions with Answers and make money from adsense revenue sharing program