You must Sign In to post a response.
  • Category: Windows 7 Features

    Network Adapter Doesn't have Valid IP Configuration

    Network adapter Local Area Connection driver information:

    Description . . . . . . . . . . : NVIDIA nForce Networking Controller
    Manufacturer . . . . . . . . . : NVIDIA
    Provider . . . . . . . . . . . : Microsoft
    Version . . . . . . . . . . . : 1.0.1.211
    Inf File Name . . . . . . . . . : C:\Windows\INF\netnvm64.inf
    Inf File Date . . . . . . . . . : Monday, July 13, 2009 8:37:30 PM
    Section Name . . . . . . . . . : NVENET73.NDI
    Hardware ID . . . . . . . . . . : pci\ven_10de&dev_07dc
    Instance Status Flags . . . . . : 0x180200a
    Device Manager Status Code . . : 0
    IfType . . . . . . . . . . . . : 6
    Physical Media Type . . . . . . : 14
    Windows Network Diagnostics Detects Problems with Network connectivity.
  • #18842
    Hi Ronald Curns

    Your network interface card and its driver are absolutely fine. There is problem with the IP address setting of your PC or destination device. Try to set the correct IP address, Subnet Mask, Gateway and DNS addresses in the network interface card of your PC.

  • #18899
    If your are facing problem with IP address then you can manually give the IP address by performing following below step.
    1. Open Network and Sharing Centre from Control Panel

    2. Now open Network Adapter Setting

    3. Type cmd command in Run and then type ipconfig /all

    4. Note down the IPv4 address and fill in the Networking section manually

    5. Now try to connect again


    Hope this will help you and if not revert back again. From now onwards try to ask such questions in Ask Expert section where the experts could give you answer properly. Forum is meant for discussion purpose related to new technology.


This thread is locked for new responses. Please post your comments and questions as a separate thread.
If required, refer to the URL of this page in your new post.