You must Sign In to post a response.
  • Category: Installation and Setup

    How to break system BIOS passward?

    Hello members

    I am facing the difficulties during the installation of fresh window in my system. Becuase my system BIOS was passward protected. I forget the passward. So any body help me to break the passward then i am able to install the window.
    Regard and thanks
    Qasim
  • #17519
    First of all it is Password not passward.
    I learnt that discharging the CMOS battery will reset the BIOS password. For this you need to open your laptop and locate CMOS with 3 pins. You should move two pins of it from 1&2 to 2&3 to discharge it. Replace the CMOS and re assemble the laptop. This may help you. But be sure that you are connected to ground before touching components.

  • #17555
    There are only three steps to re-set / clear the BIOS Password of the system, first one is try to search online to get relevant general password for a particular item. The second one is, remove CMOS battery and fix it once again to change the time/BIOS setting manually. The third one is, if it is not working after this effort, you may show your system to local Computer technician to re-set it.

    If you have old system/laptop of IBM/Lenovo, then it is little tough to do so.

    Regards,
    Hafeezur Rahman


This thread is locked for new responses. Please post your comments and questions as a separate thread.
If required, refer to the URL of this page in your new post.